RIGOL专为 USB3.0测试开发的 PC 端自动测试软件，可以高效率对 USB3.0 进行物理层一致性测试，PC 端上位机不仅可以直接连接示波器进行自动化测试，也可以让工程师在本地保存数据进行离线分析，最终给出完整的测试报告。
Communication Test Solution
Communication technology is reshaping the world at an unprecedented speed. From the evolution of 5G, the Internet of Everything to the next-generation optical communication, the entire industry is moving towards the limits of higher frequencies, larger bandwidths, and more complex protocols.
This trend poses severe testing challenges for product R&D, conformance verification, and mass production: How to accurately characterize the performance of millimeter-wave devices? How to verify the signal integrity of ultra-high-speed digital interfaces? How to ensure the stability and reliability of complex communication protocols?
We provide end-to-end testing solutions covering radio frequency microwave, high-speed digital signals, and protocol analysis. We are committed to helping customers overcome various design challenges from chips to systems through accurate and efficient measurements, accelerating the product launch process, and seizing the opportunity in the rapidly developing communication market.
Wireless Communication
To ensure that wireless communication systems can transmit and receive signals stably and reliably in various application scenarios, we provide comprehensive test solutions for wireless transceiver systems.
RIGOL's wireless test solutions cover key aspects such as transmission, reception, and antennas, enabling accurate evaluation of signal quality, sensitivity, and anti-interference performance. It helps you quickly verify your design, optimize system performance, and ensure that your products have excellent reliability and interoperability. This provides strong support for accelerating product deployment and market adoption.
MIPI D-PHY Physical Layer Compliance Test
MIPI D-PHY is the core physical layer for camera (CSI) and display (DSI) interfaces in mobile, IoT, and automotive electronics. The challenge in its testing lies in verifying the unique dual-mode operation. RIGOL offers comprehensive physical layer compliance testing, which not only accurately evaluates signal quality such as eye diagrams and jitter in high-speed (HS) mode but also precisely verifies the electrical characteristics of the low-power (LP) mode and the critical mode switching timing between the two. This ensures error-free data transmission, eliminates issues such as image corruption or screen flickering, and provides strong assurance of high quality and rapid market launch for your products.
Application Note on MIPI D-PHY Compliance Testing for High-Speed Servo Laser Processing Systems
PCIe 1.0/2.0/3.0 一致性测试解决方案
PCI Express 作为计算机和服务器内部的核心高速骨干总线，其信号质量直接决定了系统整体的数据吞吐能力。面对 PCIe 对抖动、眼图和预加重等严苛要求，我们提供从基础测试夹具到自动化分析软件的完整链路。支持对主板（System Board）和扩展卡（Add-in Card）进行精准的电气特性评估，深入剖析潜在的链路瓶颈，护航您的 PCIe 设备无缝接入高速计算时代。
>> 下载《PCIe1.0/2.0/3.0一致性测试解决方案应用指南》
Ethernet Physical Layer Compliance Test
To ensure that network devices can communicate stably and reliably in any environment, we offer a comprehensive Ethernet physical layer compliance test solution.
The RIGOL Ethernet physical layer conformance test solution strictly adheres to IEEE standards. Through automated testing of key parameters such as eye diagrams, jitter, and return loss, it accurately evaluates the signal quality at different rates. It helps you quickly identify design flaws and ensures that your products have excellent interoperability. This provides strong support for accelerating product certification and market entry.
车载以太网（Automotive Ethernet）一致性测试
现代汽车正在向「车轮上的数据中心」演进，车载以太网（10/100/1000BASE-T1）凭借高带宽与轻量化脱颖而出。由于车内电磁环境极其恶劣，对其抗干扰与稳定性要求极高。我们提供针对 OPEN Alliance 规范的专属测试包，全面覆盖 PMA（物理介质附加子层）一致性测试。从发送端时钟抖动到失真分析，全方位守护车载通信链路的绝对安全，为自动驾驶保驾护航。
>> 下载《100/1000M 车载以太网测试解决方案应用指南》
2.5G/5G/10G 以太网一致性测试
伴随 Wi-Fi 6 的普及与边缘计算的兴起，Multi-Gig（NBASE-T）甚至万兆以太网迎来爆发。极高的波特率对测试仪器的带宽与底噪提出了极限挑战。我们依托高端示波器平台，提供专为 2.5G 至 10G 以太网打造的自动化合规软件。既能精准执行复杂的发送端电性能验证，又可深度剖析高频衰减带来的信号失真，助力网络通信设备制造商稳步迈入万兆互联时代。
>> 下载《2.5G/5G/10G 以太网 一致性测试 解决方案》
深度信号完整性（SI）测试分析
当一致性测试未通过时，如何快速定位根因？我们提供全套专家级信号完整性（SI）调试工具。面对高速链路严重的信号衰减，支持导入 S 参数进行嵌入与去嵌（Embedding/De-embedding）操作，将测试点虚拟移动至芯片引脚处，还原真实的信号本貌。结合强大的眼图测试、深度的抖动分解（TIE、RJ/DJ 分离）以及接收端均衡器模拟（CTLE/FFE/DFE），帮您拨开复杂信号迷雾，精准优化设计裕量。
>> 下载《深度信号完整性（SI）测试与分析解决方案 应用指南》
>> 下载《基础抖动分析 应用指南》
>> 下载《抖动分解 应用指南》
>> 下载《时钟恢复 应用指南》
>> 下载《眼图 应用指南》
上位机软件下载
CTS 上位机软件
万兆以太网 上位机软件
RIGOL 万兆以太网一致性选件，支持完整 2.5G/5G/10GBASE-T 发射机物理层一致性测试。联动示波器、信号发生器、频谱仪、矢量网络分析仪等多款仪器及自研夹具，可自动完成 IEEE 802.3、Nbase-T、MGbase-T 等标准测试。
热门产品
DHO50000
Analog Bandwidth
Analog Channels
Maximum Real-time Sample Rate
Maximum Memory Depth
Maximum Waveform Capture Rate
Digital Channel
DS80000
Analog Bandwidth
Analog Channels
Maximum Real-time Sample Rate
Maximum Memory Depth
Maximum Waveform Capture Rate
Digital Channel
MSO/DS9000
Analog Bandwidth
Analog Channels
Maximum Real-time Sample Rate
Maximum Memory Depth
Maximum Waveform Capture Rate
Digital Channel